Router

Mikrotik Routerboard RB450G

Fungsinya sebagai penerima dan penghubung jaringan

file config router untuk ICT EQEP TIK DIY 2013 >> Download <<

nama_lokasi =NAMA_SEKOLAH system_id =NamaSekolahan ip_lan =x.x.x.1 (IP LAN) lan_network =x.x.x.0 (IP LAN) ip_server =x.x.x.2 (IP server sekolahan) ip_wan =y.y.y.y (IP WAN) wan_network =y.y.y.0 (IP WAN) ip_gateway =y.y.y.1 (IP gateway / bts) /system script add name=MAG-anw policy=ftp,read,write,policy,test,winbox,password,sniff,sensitive,api source="/interface ethernet\r\ \nset 0 auto-negotiation=no master-port=none mtu=1500 name=ether1-to-WAN speed=100Mbps\r\ \nset 1 auto-negotiation=no master-port=none mtu=1500 name=ether2-to-LAN speed=100Mbps\r\ \nset 2 master-port=ether2-to-LAN mtu=1500 name=ether3 speed=100Mbps\r\ \nset 3 master-port=ether2-to-LAN mtu=1500 name=ether4 speed=100Mbps\r\ \nset 4 master-port=ether2-to-LAN mtu=1500 name=ether5 speed=100Mbps\r\ \n/snmp set contact=BHP enabled=yes engine-id=\"\" location=RB450G_nama_lokasi trap-community=public trap-target=0.0.0.0 trap-version=1\r\ \n/snmp community set public address=0.0.0.0/0 authentication-password=\"\" authentication-protocol=MD5 encryption-password=\"\" encryption-protocol=DES name=public read-access=yes security=none write-access=no\r\ \n/ip address\r\ \nadd address=ip_lan/24 disabled=no interface=ether2-to-LAN network=lan_network\r\ \nadd address=ip_wan/24 disabled=no interface=ether1-to-WAN network=wan_network\r\ \n/ip dns\r\ \nset allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB max-udp-packet-size=512 servers=10.1.1.40\r\ \n/ip firewall filter\r\ \nadd action=accept chain=forward disabled=no dst-address=ip_server dst-port=3128 in-interface=ether2-to-LAN out-interface=ether1-to-WAN protocol=tcp src-address=lan_network/24\r\ \n/ip firewall nat\r\ \nadd action=dst-nat chain=dstnat disabled=no dst-port=80 in-interface=ether2-to-LAN protocol=tcp src-address=!ip_server to-addresses=ip_server to-ports=3128\r\ \nadd action=src-nat chain=srcnat disabled=no out-interface=ether2-to-LAN protocol=tcp src-address=lan_network/24 to-addresses=ip_lan to-ports=0-65535\r\ \nadd action=masquerade chain=srcnat disabled=no out-interface=ether1-to-WAN src-address=lan_network/24\r\ \n/ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=ip_gateway scope=30 target-scope=10\r\ \n/system identity set name=RB450G_system_id\r\ \n/system ntp client\r\ \nset enabled=yes mode=unicast primary-ntp=10.1.1.40 secondary-ntp=10.1.1.50" /user edit admin password tik-diy-2013